Link Search Menu Expand Document

This covers the basics of downloading ephemeris data for a solar system object from JPL Horizons web page in the proper format for OpenSpace, and then configuring a renderable asset for it. This document only applies to an object in the solar system, using the Sun as the origin.

Since version 0.18.0 of OpenSpace there is a feature to download Horizons data directly in the OpenSpace launcher, for more information check Download Horizons data via OpenSpace.

This method differs from the JPL Small SolarSystem Body Database (SBDB page) in that it provides pre-computed coordinates in a specified time window. The SBDB method provides orbital characteristics that are used to compute the position without a time window restriction. Objects with irregular orbits must use this Horizons method.

Downloading Ephemeris Data from JPL Horizons Site

Browse to the Horizons page ( Follow instructions for each input section below.

Ephemeris Type

Click the box to the right of the text and select Vector Table or Observer Table. OpenSpace supports both of these options but we recommend you to use Vector Table.

Target Body

Click edit and enter the desired object identifier.

Coordinate Center or Observer Location

Click edit and type @0 in the text entry box. You should end up with Solar System Barycenter (SSB) [500@0].

Time Specification

Click edit and pick the time range you want. Note that these depend on the target, and an error may result if no data exists in the specified range.

Table Settings

Click edit on Table Settings.

For the Vector Table format, the settings should be:

  • Select Output Quantities = 1. Position components {x, y, z} only
  • (None of the options for the Statistical Uncertainties should be checked)

For the optional settings at the bottom, use the following:

  • Reference frame = ICRF
  • Reference plane = ecliptic x-y plane derived from reference frame (standard obliquity, inertial)
  • Vector correction = geometric states
  • Output units = km and seconds
  • Vector labels = disabled
  • Output TDB-UT = disabled
  • CSV format = disabled
  • Object summary = enabled

For the Observer Table format, only the following checkboxes should be selected:

20. Observer range & range-rate
33. Galactic longitude & latitude

For the optional settings at the bottom, use the following:

  • date/time format = calendar date/time
  • time digits = HH:MM:SS
  • angle format = decimal degrees
  • output units = km & km/s
  • range units = kilometers
  • refraction model = none
  • (no values for the 5 cutoff variables)
  • suppress range-rate = enabled
  • skip daylight = disabled
  • extra precision = disabled
  • RTS flag = disable
  • reference system = ICRF/J2000.0
  • CSV format = disabled
  • object page = enabled

Generate Output

Finally, click on the Generate Ephemeris button to get the ephemeris data in text format. Then click the button Download Results and save it to a .hrz file.

Examine Downloaded Output

Examine the .hrz file and verify that it is valid. If it only contains the header but no space-delimited lines of data, then there should be an error message explaining the problem. For example, this will happen if the start/end dates are beyond the valid time range of the target object.

Data Usage

This wiki covers the scenario where an asset file references a data file served by one of the OpenSpace sync servers. At runtime, the file will be downloaded if a local copy does not already exist. This requires the file generated in the steps above to be uploaded to an OpenSpace sync server by one of the project’s server administrators.

For testing purposes, the file can be included in the asset by using the localResource method, but this is not discussed here (however the builders/asteroids page contains an example using this method).

Create an Asset File

The following is an example asset file of the interstellar object ‘Oumuamua. This file is located at data/assets/scene/solarsystem/interstellar/oumuamua.asset in the OpenSpace directory structure. This asset file will create a node (not renderable) for the position of the object, and a renderable trail.

local sunTransforms = asset.require("scene/solarsystem/sun/transforms")

local trajectory = asset.syncedResource({
  Name = "'Oumuamua Trajectory",
  Type = "HttpSynchronization",
  Identifier = "oumuamua_horizons",
  Version = 2

local OumuamuaTrail = {
  Identifier = "OumuamuaTrail",
  Parent = sunTransforms.SolarSystemBarycenter.Identifier,
  Renderable = {
    Type = "RenderableTrailTrajectory",
    Translation = {
      Type = "HorizonsTranslation",
      HorizonsTextFile = trajectory .. "horizons_oumuamua.hrz"
    Color = { 0.9, 0.9, 0.0 },
    StartTime = "2014 JAN 01 00:00:00",
    EndTime = "2050 JAN 01 00:00:00",
    SampleInterval = 86400,
    TimeStampSubsampleFactor = 1
  GUI = {
    Name = "'Oumuamua Trail",
    Path = "/Solar System/Interstellar"

local OumuamuaPosition = {
  Identifier = "OumuamuaPosition",
  Parent = sunTransforms.SolarSystemBarycenter.Identifier,
  Transform = {
    Translation = {
      Type = "HorizonsTranslation",
      HorizonsTextFile = trajectory .. "horizons_oumuamua.hrz"
  GUI = {
    Name = "'Oumuamua",
    Path = "/Solar System/Interstellar"




In this example, the position and trail use the sun’s barycenter (from sunTransforms) as the parent observer. The Horizons data file is included here as an HttpSynchronization synced resource with the trajectory variable. The translation type is HorizonsTranslation which requires a HorizonsTextFile to be specified using the trajectory path from the asset mentioned above. The renderable trail has a start & end time, with a SampleInterval value that divides the time range into a number of segments.

Add the Asset to OpenSpace

The final step is to simply add this asset to OpenSpace for rendering. This can be done by either:

  1. Including the asset in a .profile file before starting OpenSpace. The easiest way to do this is to use the profile editor in the launcher when starting OpenSpace.
  2. Typing in the ` console while OpenSpace is running: openspace.asset.add("scene/solarsystem/interstellar/oumuamua")